User's Manual

GlobalTech China Ltd
GT08757 PIRW-01 RF PIR Instruction manual
Prepare by : Kendy
Date : 8, May, 2009
Technical Index :
Operation Power : 9V Dc battery
Maximun transmitting power : less than 20mW
Working temperature : -10 to 70 degree
RF frequeny : 433.92MHz
RF Modulation : ASK Modulation
Instruction :
1 : Function
1.1 : Connect the 9V battery to battery socket in the PIR
1.2 : When the PIR sensor detect human moving and this will transmit RF signal to Detector
2 : ID code select
Set matching 8 pole House Data Code on PIR emitter via Dip switches, ID code setting must be
same as the receiver unit
Battery installation :
The power of the PIR emitter is use 9V Dc battery, method of replacing battery: open the housing
cover then you can see the position of battery. When replace the new battery please e nsuring correct
polarity is respected . After replace the new battery and then re cover the housing, the PIR emitter will
back to operation status.
FCC Warning Statement
FCC NOTE :
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OT TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENTN SUCH
MODIFICATIONS COULD VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions :
1. This device may not cause harmful interference, and
2. This device must accept any interference received, inculding interference that may cause
undersired operation.