User's Manual

3.3 Pairing
Please make sure you have paired the product to a Receiver with Bluetooth capability such as
Bluetooth Stereo Headset, Bluetooth Speakers or a speaker with a Bluetooth adapter connected to
it before you start to use. Kindly following the pairing procedure shows hereunder:
3.3.1 Turn your Bluetooth stereo headset or Bluetooth speaker on and enter to the pairing mode.
3.3.2 Press and hold the button till indication blinks rapidly. At this moment, the product is in the
pairing mode and will searching for the activate Bluetooth stereo headset and established the
connection automatically.
3.3.3 Since connected, the indication will turn to regular blinking twice every second.
Note:If the pairing fails, the blue keep blinking about 60 seconds then blue indicator blink
rapidly once every 2 second automatically. A re-pairing procedure is needed. Please refer
to step pairing procedure above.
4. Indications： Amber（A）， Blue（B）
4.1 Power On ：（AB）Blink tardily for 4 times
4.2 Pairing ：（B）Blink rapidly
4.3 Connecting to headset ：（B）Regular blinking twice every second
4.4 Searching for last connected headset ：（B）Blink tardily once per second
4.5 Standby ：（B）Blink rapidly once every 2 second
4.6 Low Battery ：（A）continuing blinking, the lower the faster
5. Operation Button：
5.1 Symbol Definition：
5.1.1 「Short Click: “＋”」 ：Click and release less than 1 second
5.1.2 「Long Press: “＋＋”」 ：Press and release for 2 seconds
5.1.3 「Press and Hold: “＋＋＋”」：Press and hold the key for more than 6 seconds
5.2 Function Matrix：
Feature Button Conditions
Pairing
＋＋
Standby or searching
Cancel Pairing
＋＋
Pairing
Searching For Last Connected Headset
＋
Standby
Cancel Searching
＋
Searching
Stop Connection
＋＋
Connected