User Manual

3. Prepare to use the product
3.1 Power Supply and Charging
a. As soon as power jack have been connected, the device
charging can be progressed under “ON” or “OFF” circumstance.
b. The battery must be charged with the appropriate charger, one
DC5V adapter has been enclosed in the package.
c. While charging, the amber indicator will stay on and the amber
indicator will be off as soon as it is completed. It takes you 2
hours to re-charge every time. (It takes 3 hours to fully charge
power at the very first time)
3.2 Power On / Power Off
a. Power On: Press and hold the button for approximately 2
seconds under power off status until you see the indicators start
and flashing three times.
b. Power Off: Press and hold the button for approximately
6 seconds under standby until you see the Blue and Amber
indicators bright at the same time and distinguished.
3.3 Pairing and establish a connection
Please make sure you have paired the product with Bluetooth
AV sources before you start to use. Kindly following the pairing
procedure shows hereunder:
a. Turn your Bluetooth stereo headphone on by press and hold
the button till indication blinks rapidly. At this moment, the
product is in the pairing mode.
b. To activate Bluetooth devices searching from your Bluetooth
AV sources by follow their original instruction. Please choose
the device name and enter the pass key“1234”to establish a
pairing connection.
c. The speaker supports two audio connections. Please select
HEADSET/HANDSFREE profile if you like to connect to the
mobile phone. Or A2DP/AVRCP profile for stereo sound effect
to your audio sourcing.
Note: If the pairing can not be established within 60 seconds,
the blue indicator turns to regular blinking once every 2 second
automatically. A re-pairing procedure is needed. Please repeat
pairing procedure listed above.
3.4 Bluetooth Cellphone Operation
a. Check your mobile phone’s user guide, find out the paragraphs
of Bluetooth Connectivity and follow the instruction to complete
pairing with the speaker.
b. If your cellphone support only Hands Free profile, please
activate connection from the cellphone. (Please refer to your
mobile phone’s manual for operation details)
c. Cellphone will always be the top priority, since an incoming/
outgoing has been progressed, it interrupts actively and the on-
going music will be muted. As soon as the call has been hangs
up, the music rebound afterward.
3.5 Audio Streaming via other Bluetooth audio sources
a. NB / PC (Bluetooth USB dongle)
a.1 Play music: Please complete AV pairing and then activate
intended audio player interface afterward, the music will
be transmitted to the headset automatically.
a.2 Conversation: Please complete HSP pairing and then you
can start to use the conversation functions, such as
Skype.
Note: The Bluetooth USB Dongle should support AVRCP profile to
activate “remote control” function.
b. Bluetooth AV Transmitter: Please make sure the Bluetooth
Stereo Headset has been connected with the transmitter
(blue indicator will be blinked rapidly 2 times per second). The
music will be transmitted from audio player to Bluetooth stereo
headset via Bluetooth AV Transmitter automatically.
Note: The device did not support “remote control” function when
connecting with a Bluetooth AV Transmitter; button will act as
“mute” function.
3.6 Activate or close the Caller’s ID announcement feature
a. This Bluetooth Stereo Headset supports Caller’s ID
announcement feature, press and hold the button more than
10 seconds during power off status, users can switch between
announcement or no announcement features.
3.7 Multipoint Technology : This Bluetooth Stereo Headset supports
Multipoint Technology, please refer to the 5.2 Function Matrix for
the operation guide.
3.8 Pin code:“1234”
4. Indications: Amber(A), Blue(B)
Pairing (B) Blink rapidly
During
Communication
(B) Rapidly blink 3 times per second
Playing Music (B) Rapidly blink 2 times per second
Connected and
Standby
(B) Blink tardily once per second
Standby without
Connected
(B) Blink rapidly once every 2 second
Low Battery (A) continuing blinking, the lower the faster
Charging (A) light on
5. Operation Button and Symbol Definition
5.1 Buttons:
a. Short Click: “+”: Clip and release less than 1 second
b. Long Press: “++”: Press and release for 2 seconds
c. Double Click: “v v”: Click twice within 0.5 second
d. Press and Hold: “+++”: Press and hold the key for more than
6 seconds
e. Ultra Press: “++++”: Press and hold the key for more than 10
seconds
5.2 Function Matrix
Feature Buttons Operation Conditions
Power On ++ Power Off
Pairing +++ Power Off
Power Off +++ Power On
Pick Up + Incoming Call
Hang Up + Activate Call
Pick Up Line 2 and
put Line 1 on hold
VV Line 1 in Use
Reject Line 2 call ++ Line 1 in Use
Swap between
phone calls
++
Line 1 & 2 both in use
++
Callers' Number
Announcement
Enabled / Disabled
++++ Power Off
**Reject incoming
call
++ Incoming Call
2.2 Product Specification
Bluetooth Specification Bluetooth v1.2 Class2
Bluetooth Profiles HSP / HFP / A2DP / AVRCP
Frequency Band 2.4GHz~2.4835GHz ISM Band
Working Distance 10 meters
Standby Time 120 hours
Playing Time 4~7 hours
Battery 3.7V Li-Polymer rechargeable battery
Weight 10g
Packing Contents
1. Bluetooth Stereo Pendant
2. 100-240V DC adapter
3. 3.5mm earpiece
4. One User manual
2.3 Product Outlook
LINE OUT JACK
(Ø3.5mm)
VOL (-) / BACKWARD
VOL (+) / FORWARD
8 Pin MINI USB JACK (5V)
HANG UP/ PICK UP
POWER ON/OFF
MIC
Feature Buttons Operation Conditions
**Voice dial + Standby or Idel
**Cancel voice dial + Voice Dialing
**last number redial VV Standby or Idel
**Call Transfer ++ Activate Call (*1)
Volume Up +
During Calling /
Music Playing
Volume Down +
During Calling /
Music Playing
Play + Stop / Pause
Pause + Music Playing
Stop VV Music Playing
Backward ++ Music Playing
Forward ++ Music Playing
The above functions which are remarked with ** can act on only if the
cellphone supports HFP.
Note (*1): The above functionalities may vary depending on the model
of mobile handsets. Ex. Some mobile handsets may disconnect after
call transfer.
6. Certification and Safety Approvals/General Information
6.1 The device is CE:FCC and BQB approved.
6.2 Federal Communication Commission(FCC) Statement:
a. Rule15.21:You are cautioned that changes or modifications not expressly
approved by the part responsible for compliance could void the user’s
authority to operate the equipment.
b. Rule15.105(b):This equipment has been tested and found to comply with
limits for a Class B digital device, pursuant to part 15 of the FCC rules.
1. Before you use this device, please make sure
that you
1.1 Fully charge the device at least 3 hours before you use it the first
time. Afterward it takes approximate 2 hours to fully recharge
power. (Please refer to 3.1 showed below for details.)
1.2 To pair the speakers with a Bluetooth mobile handset or other
Bluetooth devices before you making calls. The Bluetooth
audio connection between the speakers and your phone can
be established by setting up a paired link. (Please refer to 3.2
showed below for details.)
2. Introduction
2.1 Features
a. Multipoint Technology – Dual connecting capability, easily press
one button to seamlessly switch between two Bluetooth mobile
phones or mobile phone and VoIP.
b. Voice announcing for Incoming Callers’ number.
c. Stereo streaming your favorite MP3 tracks stored on your
cellphones wirelessly to the speakers.
d. Auto Swap between music operations and calls handling as
soon as calls have been made.
e. Abnormal disconnection notifications.
f. Comfortable ergonomic formation can be clipped or pendent.
g. Super lightweight and ultra small as only 10g, cutting edge
design easy to carry and storage.
h. 3.5mm audio jack allows users to use own earphones.
S14100100010
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
6.3 European Union Directives Conformance Statement
We, Global Target enterprise declares that this product:
Bluetooth portable speaker with hands free function (CK817) is conformity
with the appropriate standards EN300328, EN301489-1, EN301489-17,
EN60950.In accordance with the council directive 1999/5/EC.
For more information, please visit: http://www.globaltarget.com.tw
6.4 Bluetooth is a trade mark owned by Bluetooth SIG, Inc.
7. Caution
7.1 Important information regarding safe and efficient operation. Read this
information before using the product. Users are not permitted to make changes
or modify the device in any way. Changes or modifications not expressly
approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
7.2 Operation is subject to the following two conditions:
a. this device may not cause harmful interference, and
b. this device must accept any interference received, including interference that
may cause undesired operation of the device.
7.3 FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. End users must follow the specific operation
instructions for satisfying RF exposure compliance. This transmitter must not be
co-located or operation in conjunction with any other antenna or transmitter.