User's Manual

Dial out by cell phone’s voice dial function
1. Voice dialing of your phone setting must be turned on and voice tags are stored.
Please refer to your cell phone manual.
2. Press once the TALK button on the car kit under standby mode and you can hear
the confirmation ring tone.
3. After this ring tone, then you can speak the voice tag as entered in the cell phone
voice dial phone book.
4. The cell phone automatically dials out.
NOTE: The cell phone must support voice dialing function.
Volume adjustment
You can press volume up key once to increase the volume or volume down key to
decrease the volume.
Mute
During conversation, you can press volume up key or volume down key about 3
seconds, the car kit will enter mute mode. Press once either key again will cancel
mute mode.
Last number redial
When the car kit is in standby condition (not in conversation), press and hold the Hang
up button for about 3 sec. and your phone will redial the last number that you called.
Note: This function only works on Bluetooth phones that support Handsfree profile;
therefore you need to make sure that the phone and the car kit are linked with
Handsfree profile.
LED indication Meaning
Pairing: fast flash 5 times every 1 second.
Standby (w/pairing data):flash 1 time every 1 second.
Mute: flash 2 times and stop for 1 second.
Talking: flash 2 times every 1 second.
Incoming call: flash 5 times and stop for 2 times.
Standby without pairing: LED is off