User's Manual

the connections.
6. The phone’s screen will display that it has found GTE-802 and ask you to confirm
that you want to pair with it. Please confirm this.
7. Enter passkey 1234, when your phone menu prompts you, and the phone will start
to pair the car kit.
8. Your phone screen will advise the pairing has been made successfully.
9. If the pairing fails, you can press car kit Hang up button for about 3 seconds to
stop pairing mode. Then you may proceed above procedure again.
Taking a call and end a call
Before taking a call, it is necessary to set up auto answering or manual answering
mode in advance. The default setting is auto answering mode when the car kit is out
from the factory.
Take a call
If it is at auto answering mode, the call is accepted by car kit automatically after you
hear about two ring tones from the car kit.
If it is at manual answering mode, you can talk until Talk button is pressed once.
End a call
To press Hang up button once to end a call while you are talking. Or, the call is hung
off when the other side hangs off the call.
Making a Call
There are two methods to make a call.
Note: Make sure the car kit and the mobile phone are under link stage.
Dial out from cell phone key buttons
1. Using the phone’s keypad, dial the phone number.
2. To send the call, press he phone’s SEND/CALL button – the phone initiates the
call.
3. The call will be then transferred automatically to the car kit when the connection
is made.