User Manual

Pairing
1. Ensure the car kit is switched off.
2. Hold the “Hang Up “button more than 6 seconds until you see an LED flashing rapidly and you will hear
a rising and falling tone.
3. Ensure that the mobile phone is less than 1 meter away and that Bluetooth is activated in your mobile
phone.
4. Put your mobile phone in search for new Bluetooth devices. If you are asked for a PIN number in the
mobile phone, note that the PIN number is “1234”.
5. If pairing has been completed successfully a two-tone signal shall be heard.
6. Every time you switch on the Car Kit, it will attempt connection to the last mobile phone that you have it
paired to.
7. Pairing will timeout after 60 seconds at which a two-tone signal will be heard.
* When you use CK802D at the first time (in factory setting mode), it will get into the pairing
mode automatically
External microphone
Rear mic-in jack is possibly to connect an external microphone to collect better voice output.
Storage of car kit
1. Always store CK802D safely. It is not suitable for children.
2. Avoid storage in direct constant sun light.
3. Do not expose CK802D or any of its supplied parts to rain or other liquids.
If you wish to clean CK802D, please use dry and soft cloth
Notice
Please make sure that the Car Kit has been shut-down before you leaving the car. Because some
kind of cars still supply power to cigarette lighter jack after you turn off the engine.