User's Manual

2.3.2 Basic Setting
This is the page allow you to change the access point.
Mode: Operating mode. This Ethernet adapter supports infrastructure and Ad-Hoc
mode.
SSID: Service Set Identifier, which is a unique name shared among all clients and
nodes in a wireless network. The SSID must be identical for each clients and nodes in
the wireless network.
Channel: The channel that AP will operate in. In Ad-Hoc mode, you can select the
channel range of 1 to 11 for North America (FCC) domain, 1 to 13 for European
(ETSI) domain and 1 to 14 for Japanese domain.
Tx Rate: Select the data rate for data transmission. Default is auto.
Authentication Type: The authentication type default is set to open system. It
means the sender and receiver do not share secret Key for communication. Shared
Key is the sender and receiver shares the common key for data communication, and
the key is used for extended length of time.
WEP Key: WEP data encryption feature. To disable WEP security, click on the
“Disable” option. To enable WEP security, there are 2 types to select – 64bits and 128
bits. When it is selected, the key value must be entered in ASCII or HEX format.