Instruction Manual
=
Specifications
Innovative Training Solutions
www.globalspecialties.com
Test Equipment
NEW! 5Mhz Function Generator
with Frequency Counter
Model
4005
OUTPUT CHARACTERISTICS
Waveforms
Sine, Square, Triangle, Skewed Sine, Pulse, Ramp Sawtooth,
TTL/CMOS Leveled Square, DC
Frequency Range
0.05Hz to 5MHz in 7 Ranges (5, 50, 500, 5k, 50k, 500k, 5M)
Frequency Accuracy
± 2% 2% (5, 50, 500, 5K, 50K, 500K, 5MHz Range, Full Scale)
Output Level: Sine &
Triangle wave
20 Vpp in open circuit, 10 Vpp into 50 Load
Square Wave
19 Vpp in open circuit, 9.5 Vpp into 50 Load
Output Impedance
50 ±5%
Attenuator
-20 dB fixed and continuously variable (more than –20dB)
WAVEFORM CHARACTERISTICS
Sine wave -Flatness
± 3dB to 5 MHz (more than 14Vpp)
Distortion
Less than 1% at 10 Hz to 100 KHz
Square wave -Rise and
Fall Time
Less than 25 nS (at 5MHz)
Triangle wave -Linearity
More than 99% at 0.5 Hz to 100 KHz
TTL Output -Rise and
Fall Time
Less than 30 nS (at 1MHz)
Output Level
TTL Level (H >/_2.4V, L </_0.4V)
CMOS Output -Rise and
Fall Time
Less than 180 nS (at 1MHz)
Output Level
4V to 15V ± 2V, Variable
DUTY RATIO
1:1 to 10:1
SWEEP FUNCTION CHARACTERISTICS
Mode
Linear
Width
Variable from 1:1 to 100:1
Rate
0.5 Hz to 50 Hz (20 mS to 2 S)
External VCF Input
Input Voltage: 0 to 10 V
Input Impedance
Approx. 1 K