User's Manual

3, Close the screw with a screwdriver. (Note: Children under
Age 12 should open the screws under adult’s supervision)
4, The fully charging time is about 12hours.
A, FOR USE OF NON RECHARGEABLE BATTERIES(Not Included)
1, Slid down the battery compartment cover.
2, Insert 3* AAA dry batteries (not included)
3, Position the batteries according to the polarity making
on the battery compartment.
4, After placing batteries into correct positions, replace the
battery cover.
5, Close the screw with a screwdriver. (Note: Children under
Age 12 should open the screws under adult’s supervision)
4 Using the device
4.1 Turning the device on/off
Switch on the device: Press and hold on the /VOL for 3
seconds then you will hear a beep sound.
Switch off the device: Press and hold on the /VOL for 3
seconds then you will hear a beep sound.
4.2 Changing Channels
Press the CH button for 2 seconds, the Channel number
will change from 1-3. In order to fix the channel, the
devices set to press the CH button for 2 seconds, then
change to the next channel)
Note: if no button is pressed within 6 seconds during
setting, the device will return to stand-by mode.
4.3 Receiving/transmitting communications:
The devices are in “Reception” mode when it is turned
ON and no transmitting. When a signal is received on the
current channel, the device will in reception.
When you press the PTT (push to talk) button, the
devices switches to “Transmission” mode. The current
digital number will flash in transmitting mode.