User's Manual
codes.   
Press the PTT button to confirm and return to stand-by mode..   
License free  radio’s operating on the 400-470MHZ frequency band, 
the device has 22 available radio channels. If there are many device 
users near you, there is a chance that some of the users are operating 
on the same radio channel.   
When using CTCSS, a low frequency tone (between 67-250Hz) will be 
transmitted along with the voice signal. There are 38 available tones 
to choose form.   
You are free to choose one of the 38 available sub-channels. Due to 
filtering, these sub-channels will generally not be audible so they will 
note disturb the communication.     
4.7 VOX (Hands free function) 
Press the MENU button three times, the current VOX setting will flash 
on the display and the VOX icon will display,   
Press UP▲ button to set the VOX sensitivity level between 1 and 3 
level(level 3 is the high sensitive level). 
Press down▼ button until “OF” appears on the display to turn VOX 
OFF.   
Press the PTT button to confirm and return to stand-by mode. 
In VOX mode, the radio will transmit a signal when it is activated by 
your voice or other sound around you.   
VOX Operation is not recommended if you plan to use your device in a 
noisy or windy environment.   
Note: VOX mode will be over ride when you press the PTT button.   
4.8 Scanning for an active radio channel 
Press  and  hold  the  UP▲  button  2  seconds:  The  “SCAN”  function 
indicator  will  appear  on  the  display  and  the  channel  will  scan 
continuously  from  1  to  22.  Once  an  active  channel  is  found,  the 
scanning will stop and you can listen to the transmission.   
When the transmission is on the found channel stop, the scanning will 
resume automatically.   
Note: If you press PTT button while listening to a found channel, the 
device will go back to stand-by mode on the found channel. 
4.9 Monitor 
Press and hold the DOWN▼ button about 3 seconds to active monitor. 
Release the DOWN▼ button return to stand by mode. 
4.10 Setting the Call tones 
The device has 10 call tones. 
Press the MENU button 4 times, “CA” is displayed and on the current 









