INSTRUCTION MANUAL 2000W Heat Gun Paint/ Stripper Kit • Melbourne • Perth • Auckland • Hong Kong • Shanghai • Taipei • New York • Verona • London • Paris HG2000K 030825 MA ED1
Contents Warranty Introduction Environmental protection Description of symbols Specifications General safety instructions Safety rules for heat guns Know your product Accessories Features Variable Temperature Control Temperature Indicator Safety Cut Out Assembling the Wire Stand Unpacking Full 2 Years Home Use Warranty 2 3 3 3 3 4 5 6 6 7 7 7 7 7 8 Whilst every effort is made to ensure your complete satisfaction with this tool, occasionally, due to the mass manufacturing techniques, a tool may not live u
Description of symbols Dear Customer The rating plate on your tool may show symbols. These represent important information about the product or instructions on its use. Wear hearing protection. Wear eye protection. Wear breathing protection. If you require any help with your product, whether it is a Warranty claim, spare part or user information, please phone our Help Line for an immediate response. Phone 1300 880 001 in Australia or 0800 445 721 in New Zealand.
General safety instructions 7. Dress correctly. Do not wear loose clothing or jewellery. They can be caught in moving parts. Rubber gloves and non-slip footwear are recommended when working outdoors. If you have long hair, wear a protective hair covering. 8. Use safety accessories. Safety glasses and earmuffs should always be worn. A face or dust mask is also required if the drilling operation creates dust. 9. Do not abuse the power cord. Never pull the cord to disconnect the tool from the power point.
17. Stay alert. Watch what you are doing. Use common sense. Do not operate a power tool when you are tired. 18. Check for damaged parts. Before using a tool, check that there are no damaged parts. If a part is slightly damaged, carefully determine if it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, proper mounting and any other conditions that may affect the operation of the tool.
Know your product 2 1 3 4 5 1. Heat Nozzle 2. Guard Sleeve 3. Body 4. LED Temperature Indicator 5. Variable Temperature Control Dial 6. Two speed rocker switch 7. Wire Stand 8. Power Cord Accessories 9. Heat Spreader 10. Heat Reflector 11. Heat Concentrator 12. Heat Deflector 13. Paint Scraper 14. Scraper Handle Scrapers 15.
Features: Temperature Indicator The temperature indicator gives the temperature during operation. 6 LED’s are placed on the box lid.
necessary. A Phillips #1 screwdriver (not supplied) is needed during the assembly. 1. Place the wire stand to the bottom of the handle, ensuring that the ends of the stand align themselves with the holes on the handle. 2. Insert the Phillips screw on one side between the end of the stand and the hole of the handle. Use the Phillips screwdriver to secure the screw. 3. Repeat this process on the other side of the handle.
Carefully read the entire Instruction Manual before using this product. Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia) or 0800 445 721 (New Zealand) When you make your call, please have the following information at hand: With continuing product development changes may have occurred which render the product received slightly different to that shown in this instruction manual.
