INSTRUCTION MANUAL 710W Drywall Screwgun • Melbourne • Perth • Auckland • Hong Kong • Shanghai • Taipei • New York • Verona • London • Paris DSSCR 050825 ED9 JJ
Contents Warranty Description of symbols Specifications Safety instructions Additional safety rules for drills Contents of carton Know your product Unpacking Adjusting the driving depths Fitting a 1/4” shank bit Switching on and off Direction of rotation Lock-on button Speed selection Operation Belt clip Cleaning Power cord maintenance Full 2 Years Home Use Warranty 2 3 3 4 5 6 7 8 8 8 8 9 9 9 9 9 10 10 Whilst every effort is made to ensure your complete satisfaction with this tool, occasionally, due to
Description of symbols Dear Customer The rating plate on your tool may show symbols. These represent important information about the product or instructions on its use. Wear hearing protection. Wear eye protection. Wear breathing protection. If you require any help with your product, whether it is a Warranty claim, spare part or user information, please phone our Help Line for an immediate response. Phone 1300 880 001 in Australia or 0800 445 721 in New Zealand.
Safety instructions • When operating a power tool outdoors, use an outdoor extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. Personal safety • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. • Use safety equipment.
Power tool use and care • Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. • Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. • Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools.
• • • • Keep the area free of tripping hazards. Do not let anyone under 18 years operate this tool. Do not touch the bit after operation. It will be very hot. Keep your hands away from under the workpiece. Contents of carton The drywall screwdriver is supplied with the following accessories • Magnetic bit holder 6.
Know your product 1. Nose piece 2. Depth adjustment collar 3. Magnetic hex shank bit holder 4. Hex nut 5. Belt clip 6. Lock-on button 7. Variable speed trigger switch 8. Speed control 9. Forward/reverse switch 10.
Unpacking Fitting a 1/4” shank bit Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury. 1/4” Shank bits and bit holder extensions such as the one supplied as an accessory can be fitted into the magnetic hex shank bit holder (3) located inside the nose piece (1).
Direction of rotation Speed selection The direction of motor rotation is controlled by the forward/ reverse switch (9). 1. The bit rotates in a clockwise direction (viewed from the rear) when the forward/reverse switch is set to the right-hand side of the tool. This is the position required for driving screws and other fasteners. 2. The bit rotates in an anticlockwise direction (viewed from the rear) when the forward/reverse switch is set to the left-hand side of the tool.
Cleaning 1. Keep your machine and its cord clean. The outside of the machine can be cleaned using a damp soft cloth with a mild detergent if required. 2. Some maintenance products and solvents may damage the plastic parts; these include products containing benzene, trichloroethylene, chloride and ammonia. 3. Excessive sparking generally indicates the presence of dirt in the motor or abnormal wear on the carbon brushes. 4.
Carefully read the entire Instruction Manual before using this product. Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia) or 0800 445 721 (New Zealand) When you make your call, please have the following information at hand: With continuing product development changes may have occurred which render the product received slightly different to that shown in this instruction manual.
