User's Manual

SYMPTOMS SOLUTION
No power
Check the batteries. Ensure that the batteries are
installed properly.
The batteries may be weak.
Recharge your batteries by using the A/C
Adapter Charger.
Your batteries may be damaged. Replace old
batteries with new one
Reception is weak
Press the UP key to increase VOLUME.
The receiving signal may be weak and/or out of
range.
Check the antenna position. For optimum
performance make sure the antenna is pointing
upright
Cannot change
channels
To change channels, press the MENU key until
the channel number flashes on the LCD
Screen.
Press the UP or DOWN key to change
channels.
Batteries may be weak.
Range is limited
Batteries may be weak
Replace batteries if the BATTERY LEVEL
indicator is low.
The maximum range will vary depending on
terrain and environment.
Open fields provide the maximum range, while
steel/concrete structures, heavy foliage, and
use in buildings and in vehicles may limit the
range significantly.
Check the antenna position. For optimum
performance make sure the antenna is pointing
upright.
Sound distortion
problems
If you are transmitting, speak in a normal tone
of voice, 2 to 3 inches away from the
MICROPHONE.
If you are receiving, lower the volume to a
comfortable level.
COMMUNICATOR is too close.
COMMUNICATOR must be at least 10 feet
apart; increase your distance.
COMMUNICATOR is too far apart. Obstacles
interfere with transmission. Talk range is up to
2 miles in clear unobstructed conditions.
TROUBLESHOOTING