User Manual

GETTING STARTED
Your XGM-950 COMMUNICATOR is also capable of charging the Ni-MH
RECHARGEABLE BATTERY PACK with an A/C ADAPTER CHARGER (not included)
thru the EAR/MIC JACK. You can purchase A/C ADAPTER CHARGER and Ni-MH
RECHARGEABLE BATTERY PACK (see accessory order form to order).
To charge:
1. Lift the HEADSET/CHARGER JACK COVER located on the top of your XGM-950
COMMUNICATOR.
2. Connect the A/C ADAPTER CHARGER into an A/C wall outlet.
3. Insert the A/C ADAPTER CHARGER into the HEADSET/CHARGER JACK. During
charging, the LOW BATTERY LEVEL icon will disappear once the BATTERY is fully
charged.
Battery Level and Low Battery Operation
The Low Battery Level icon will appear on the LCD Screen when the COMMUNICATOR
detects that the BATTERY LEVEL is low.
The COMMUNICATOR LOW BATTERY LEVEL icon will blink when a low BATTERY
level is detected while in COMMUNICATOR mode. When the COMMUNICATOR is in
COMMUNICATOR mode and the BATTERY LEVEL is low, the icon will blink
continuously and the TX POWER setting will automatically change from HI to LO (if TX
POWER is set to high) when the TALK button is pressed or if VOX is activated. The
COMMUNICATOR BATTERY should be recharged at this time,
7
HEADSET/CHARGER
JACK COVER