User Manual

OPERATION

Voice Operated Transmission (VOX):

The COMMUNICATOR is equipped with an adjustable VOICE OPERATED

TRANSMITTER (VOX), which enables the user to enter the TRANSMIT mode

without pressing the TALK button. While in VOX mode, the COMMUNICATOR

can be activated to transmit a signal by speaking into the MICROPHONE or by

receiving other sounds in the environment. VOX operation is not

recommended in a noisy or windy environment.

1. Press the POWER/MODE button four times and the VOX icon will flash on the LCD

Screen.

2. Press the UP

or DOWN

button to turn the VOX feature ON or OFF. When the

VOX feature is ON, the VOX icon will be displayed on the LCD Screen.

3. Press the TALK button to return to RECEIVE/STANDBY mode.

For greater privacy and convenience of hands-free transmission, use an Ear

Bud (headset) with Microphone (see Accessory Order Form) when using VOX

mode.

Connecting the Ear Bud (Headset):

1. Set the COMMUNICATOR to VOX mode.

2. Lift the HEADSET/CHARGER JACK COVER located on the top of the

COMMUNICATOR.

3. Insert the plug end of the Ear Bud into the HEADSET/CHARGER JACK. Place the Ear

Bud earpieces over and in the ear, and then adjust the location of the MICROPHONE.

Roger Beep Tone Feature:

The COMMUNICATOR is equipped with an adjustable ROGER BEEP TONE

feature, which enables the user to send a Beep Tone after every press of the

TALK Button. This will notify any receiving unit that the transmission has

ended.

1. Press the POWER/MODE button five times and the “rb” icon will appear on the LCD

Screen.

2. Press the UP

or DOWN

button to turn the ROGER BEEP feature ON or OFF. .

3. Press the TALK button to return to RECEIVE/STANDBY mode.