User Manual

OPERATION

Changing Channels:

The COMMUNICATOR has 22 channels for communicating with others. To

change the COMMUNICATOR's channels while in COMMUNICATOR mode:

1. Enter COMMUNICATOR mode by pressing the POWER/MODE button for 3 seconds a

long "beep" will be heard, the COMMUNICATOR's LCD Screen will quickly display all

of the COMMUNICATOR's status icons, and the COMMUNICATOR will enter

COMMUNICATOR mode and display the current channel.

2. Press the POWER/MODE button momentarily (for no longer than 1 second) to enter the

MENU mode. You will hear a "beep" and the channel number will "flash" on the LCD

Screen.

3. Press the UP

or DOWN

button repeatedly (or hold the button to scroll) to increase

or decrease the channel number on the COMMUNICATOR's LCD Screen, and a short

"beep" will be heard with each channel change.

4. Press the POWER/MODE button again to enter the CTCSS Code mode (refer to the

"CTCSS CODE" section below for more information) or press the TALK button to exit to

STANDBY mode.

5. Press the POWER/MODE button again to enter the POWER HI/LO mode (refer to the

"POWER HI/LO SELECTION" section for more information) or press the TALK button

to exit to STANDBY mode.

6. Press the POWER/MODE button again to enter the VOX mode (refer to the "VOX"

section for more information) or press the TALK button to exit to STANDBY mode.

7. Press the POWER/MODE button again to enter the ROGER BEEP mode (refer to the

"ROGER BEEP" section for more information) or press the TALK button to exit to

STANDBY mode.

8. Press the TALK button to exit the MENU mode at any time, or the unit will automatically

return to STANDBY mode if no buttons have been pressed for 10 seconds.