User Manual
Table Of Contents
- NOTE: The KP3X have internal battery protection, however during long term storage it is strongly recommended that you recharge the battery every 6 months or remove the battery if the unit will not be used for a long period of time.
- Navigating through the Menu
- To set the Time
- Channel Scan
- Transmitting and Receiving
- Sending a Call Alert Tone
- The Auto Squelch Feature
- The Automatic Power Save Feature
- The Display Backlit Display Feature
1. Channel Number (1~14) – Shows the current channel
2. Transmit Indicator (TX) – Indicates when the unit is transmitting
3. Receive Indicator (RX) – Indicates when the unit is receiving a transmission
4. Volume Selection (8 Bars) – Shows the current volume setting
5. Call Tone Transmission (CALL) – Indicates when the unit is paging
6. Low Battery Level indicator - Indicates when battery level is low or during
charging the battery
7. VOX – Indicates when unit is in VOX mode
8. 12 Hour Time Clock (12:00)
9. Power / Menu (Multi Function) – Press and hold to turn the Communicator
ON/OFF. Momentary press will enter the Menu and Clock setting.
10. PTT / Call (Multi Function) – Press and hold to transmit voice communication.
Press twice in rapid action to transmit call tone.
11. Up – Used to adjust volume level (default), change channel and clock setting (in
Menu)
12. Down – Used to adjust volume level (default), change channel and clock setting (in
Menu)
13. Scan – Press to enter Channel Scan.
14. MIC – Built-in microphone
15. Speaker – Built-in speaker
16.
Antenna
DISPLAYS
KEYS and CONTROLS
1
2
3
4
5
6
7 8
16
15
14
13
12
11
9
10