User Manual

8
Operation Instructions
1. Ensure the machine is OFF.
Connect the machine’s power plug to a power source with a GFCI receptacle.
2. Press the power switch on the machine’s frame to start the machine.
3. Ensure the package isn’t creased or wet, and does not have plastic materials or dust
on the outside. Place the package on the rollers and gently push it forward towards
the lower switch A. See gure 7
4. When the package passes switch A, the side guide rails will automatically grab and
center the carton. See gure 8
5. The upper sealing component will automatically lower until the lever component is
pressed against the carton. The conveyor belt will activate and pull the box through
both the upper and lower sealing heads. See gure 9 & 10
6. If you encounter problems during the packaging process, press the emergency
stop switch to stop the machine. The upper sealing component will rise to its highest
position, the guiding rails will open to the widest position, and the motor will stop
working. Then take out the package and check the machine. Turn the emergency stop
switch clockwise until the green strip is revealed and press the power button to restart
the machine.
NOTE:
Rotate the stop switch button clockwise to resume operation.