User Manual
7
Air Pressure Adjustment
The button A (cylinder pressure regulating valve) is used to adjust the pressure (0.2 MPa) of
the guide rails on both sides. If the pressure is too high, the box can get damaged.
The button B (lifting cylinder buer pressure regulating valve) is used to adjust the pressure
of the upper sealing component against the carton (0.12~0.15 MPa). Increase the pressure
to prevent damaging a thin, light, or delicate box.
1. Pull the button outward away from the machine to unlock the knob.
2. Turn the button clockwise to increase the pressure, and counterclockwise to decrease
the pressure. After adjusting the pressure, press down the button to lock the setting.
Figure 6