User Manual

High Velocity Dock Fan

Installation Instructions

Installing the "U" shape yoke

Align the holes of the “U” shaped yoke and dock fan, tighten with the rubber pads and tilt adjustable knobs.

Let the fan hang from the “U” shaped yoke.

14" Dock Fan 293092 18" Dock Fan 293093 & 22" Dock Fan 293094

Mounting with Dock truck Mount Bracket

1. Determine the mounting location on the wall and mark the hole locations.

2. Use a 0.7 inch(18mm) drill bit and drill holes 2.75 inch(70mm) deep.

3. Insert the expansion bolts ﬂush to the wall.

4. Attach the dock truck mount bracket and secure with expansion nut .

NOTE: The bracket must be ﬁxed securely to the wall before hanging the fan.

5. Put the fan onto the “U” shaped yoke, align the holes of the “U” shaped yoke and the bracket, secure with

screw, washer and nut.

User Manual