User Manual

ManualsBrandsGlobal Industrial ManualsAir Conditioners & ChillersGlobal Industrial Packaged Terminal Air Conditioner W/Heat Pump, 12000 BTU Cool, 208/230V

Table Of Contents

PACKAGED TERMINAL

AIR CONDITIONER/HEAT PUMP

User’s Manual

globalindustrial.ca

Assembly Instructions

Instrucciones de Ensamblaje

Directives d’assemblage

Customer Service

US: 1-800-645-2986

Servicio de atención al Cliente

US: 1-800-645-2986

Service à la clientèle

Canada: 888-645-2986

Read this manual thoroughly prior to

installation, operation or maintenance.

Keep these instructions in a safe

location for future reference. For

questions, visit globalindustrial.com or

contact Customer Service at

1-800-645-2986.

Model 293083 - Packaged Terminal AC 7000 BTU w/ Electric Heat - 208/230V

Model 293076 - Packaged Terminal AC 9000 BTU w/ Electric Heat - 208/230V

Model 293084 - Packaged Terminal AC 12000 BTU w/ Electric Heat - 208/230V

Model 293085 - Packaged Terminal AC 15000 BTU w/ Electric Heat - 208/230V

Model 293075 - Packaged Terminal AC 7000 BTU w/ Heat Pump - 208/230V

Model 293086 - Packaged Terminal AC 9000 BTU w/ Heat Pump - 208/230V

Model 293087 - Packaged Terminal AC 12000 BTU w/ Heat Pump - 208/230V

Model 293088 - Packaged Terminal AC 15000 BTU w/ Heat Pump - 208/230V

Read all instructions before use. To reduce the risk of fire, electric shock, or injury to persons when

using this appliance, follow the following precautions.

• DO NOT use when the power cord or plug are damaged. Replace damaged power cords.

• Plug into a grounded 3 prong outlet.

• DO NOT remove the ground prong.

• DO NOT use extension cords.

• Unplug the power cord before moving it or performing maintenance.

• Unplug the machine when it is not in use.

• DO NOT unplug the power cord by pulling the power cord. Only pull the plug.

• DO NOT immerse in water.

Summary of content (18 pages)

PAGE 1
User’s Manual TM globalindustrial.
PAGE 2
CONTENTS 1.SAFETY PRECAUTIONS....................................................................1 2.IMPORTANT SAFETY INSTRUCTIONS ............................................4 3.AIR CONDITIONER FEATURES.........................................................5 4.CONTROL PANEL OPERATION.........................................................6 5.DIP SWITCHES CONFIGURATION.....................................................7 6.DIP SWITCHES CONFIGURATION BY PANEL CONTROL...............9 7.
PAGE 3
SAFETY PRECAUTIONS To prevent injury to the user or other people and property damage, the following instructions must be followed. WARNING This symbol indicates the possibility of death or serious injury. CAUTION This symbol indicates the possibility of injury or damage to property. Meanings of symbols used in this manual are as shown below. Never do this. ! Always do this. WARNING ! ! ! Otherwise, it may cause Do not operate or stop the unit by inserting or pulling out the power plug.
PAGE 4
WARNING ! ! Keep firearms away. Do not use the power cord close to heating appliances. It may cause fire. It may cause fire and electric shock. Do not use the power cord near flammable gas or combustibles, such as gasoline, benzene, thinner, etc. It may cause an explosion or fire. Ventilate room before operating air conditioner if there is a gas leakage from another appliance. Do not disassemble or modify unit. It may cause explosion, fire and, burns. It may cause failure and electric shock.
PAGE 5
CAUTION Do not place obstacles around air-inlets or inside of air-outlet. It may damage the appliance Do not use strong detergents such as wax or thinners but use a soft cloth. Harsh detergents can ruin the product color or scratch the surface. ! Ensure that the installation bracket of the outdoor appliance is not damaged due to prolonged exposure. If bracket is damaged, there is concern of damage due to falling of unit.
PAGE 6
IMPORTANT SAFETY INSTRUCTIONS WARNING NOTE The power supply cord with this air conditioner contains a current detection device designed to reduce the risk of fire. Please refer to the section Operation , of Current Device for details. In the event that the power supply cord is damaged, it cannot be repaired-it must be replaced with a cord from the Product Manufacturer. , Do not, under any circumstances, cut, remove, or bypass the grounding prong.
PAGE 7
Operation of Cur rent Device(optional) The power supply cord contains a current device that senses damage to the power cord. To test your power supply cord do the following: 1. Plug in the Air Conditioner. 2. The power supply cord will have TWO buttons on the plug head. Press the TEST button, you will notice a click as the RESET button pops out. 3. Press the RESET button, again you will notice a click as the button engages. 4. The power supply cord is now supplying electricity to the unit.
PAGE 8
CONTROL PANEL OPERATION The control panel keypad will look like the following Fig.1. For some models with REMOTE SIGNAL RECEPTOR, the unit can be controlled by the control panel alone or by the remote. NOTE: Some models have no REMOTE SIGNAL RECEPTOR. Fig.1 POWER - Press the POWER button to turn the unit on or off. MODE - Push this button to cycle through the modes from COOL-HEAT-FAN-COOL.The indicator light beside the "MODE" option will illuminate, identifying the mode selected. - COOL:.
PAGE 9
CONTROL PANEL OPERATION（CONTINUED） Accessory NOTE:This air conditioner is designed to be operated under the following condition: Cooling Outdoor temp: operation Indoor temp: Heating Outdoor temp: operation Indoor temp: 18-43OC/64-109OF (18-52OC/64-125OF for special tropical models) THIS UNIT IS CONTROLLED BY WALL MOUNTED THERMOSTAT 17-32 C/62-90OF O -5-24 C/23-76 F O 0-27 C/32-80 F O O NOTE:When the unit displays LC (Pads on the control panel is not available.
PAGE 10
DIP SWITCHES CONFIGURATIONS Table 1 No . S1 S2 S3 UP(ON) Electric Heat Only Temperature Display in OF Wall Thermostat Enable DIP SWITCHES CONFIGURATIONS DOWN(OFF) Electric Heat and Pump Heat Temperature Display in OC Control Panel Enable UP*UP:61OF~86OF(16OC~30OC); S4*S5 UP*DOWN:65OF~78OF(18OC~26OC); Two configurations (S4*S5) combine to select set point range.
PAGE 11
DIP SWITCHES CONFIGURATIONS by PANEL CONTROL DIP SWITCHES CONFIGURATIONS by PANEL CONTROL - Turn off the unit. - Press the up ( ) and down ( ) buttons together for 3 seconds to activate the dip switches configurations by panel control (see Fig.4). - See Table 1 for Dip Switches configurations and functions by panel control.
PAGE 12
WALL THERMOSTAT TERMINAL IMPORTANT: Only trained, qualified personnel should access electrical panel on unit and install electrical accessories. Please contact your local electrical contractor, dealer, or distributor for assistance. Thermostat Wire Routing Thermostat wire is field supplied. Recommended wire gauge is 18 to 20 gauge solid thermostat wire. NOTE: It is recommended that extra wires are run to unit in case any are damaged during installation.
PAGE 13
WALL THERMOSTAT TERMINAL (OPTIONAL) FRONT DESK CONTROL The controller can handle a switch signal from FC(L) and FC(N) input, called front desk control. Input must be 24VAC. If system doesn't receive a 24VAC signal, it will turn unit off; otherwise, the unit runs in normal control. - The DIP switch can control the FRONT DESK CONTROL feature. The DIP switch is on the DOWN position, the unit will be turn off; otherwise,the unit runs in normal control. See FigB.
PAGE 14
INSTALLATION HOW TO INSTALL THE UNIT Dimension of air conditioner CAUTION 1067mm/42inch There are sharp edges that can cause serious cuts. The air conditioner is HEAVY. Use 2 people to lift. 408mm/16inch - For existing sleeve,you should measure the wall sleeve dimensions. - Install the new air conditioner according to these installation instructions to achieve the best performance.
PAGE 15
INSTALLATION（CONTINUED） UNIT INSTALLATION (CONTINUED) - Rotate the vent control lever to either open or close the vent door.(See Fig.9) Vent control lever CAUTION Do not put obstacles around air-inlet or inside of air-outlet of the unit, such as window curtain etc. Always insert the filter securely, clean filter once every two weeks as required. Vent closed Vent open Fig.9 NOTE:When vent control lever set at CLOSE,only the air inside the room is circulated and filtered.
PAGE 16
CARE AND CLEANING FRONT PANEL AND CASE - Turn unit off and disconnect power supply.To clean, use water and a mild detergent.DO NOT use bleach and abrasivers.Some commercial cleaners may damage the plastic parts. OUTDOOR COIL - Coil on outdoor side of unit should be checked regularly.Unit will need to be removed to inspect dirt build-up that will occur on the inside of the coil. If clogged with dirt and soot ,coil should be professionally cleaned.Clean inside and outside of outdoor coils regularly.
PAGE 17
TROUBLESHOOTING POSSIBLE CAUSES SOLUTONS UNIT DOES NOT START Unit may be unplugged Fuse may have blown Circuit breaker may have been tripped Unit may be off Unit may be in a protection mode. Check that plug is plugged securely in wall receptacle. Note:Plug has a test/reset button on it.Make sure that the plug has not tripped. Replace the fuse.See Note 1. Reset circuit breaker.See Note 1. Turn unit on (bottom right button on keypad).
PAGE 18
TROUBLESHOOTING POSSIBLE CAUSES SOLUTONS ICE OR FROST FORMS ON INDOOR COIL Low outdoor temperature Dirty filters When outdoor temperature is approximately 55OF or below,frost may form on the indoor coil when unit is in Cooling mode.Switch unit to FAN operation until ice or frost melts. Remove and clean filters. COMPRESSOR PROTECTION Power may have cycled,so compressor is in a restart protection.