User's Manual

This document and information herein is the property of Global Display Solutions and all unauthorised use and

Unpublished Property of GDS.

MAN10455_00 5 of 5

Figure 2 J9 connector details

5. Operating mode

The Remote MIFARE board operates with both user keys based on Mifare protocol (TGS Mifare and

MyWellness key). The minimum reading distance with Mifare devices must be at least 15 mm.

In the case of interaction with user key based on Mifare protocol, the board traces its operating states, based on

the use of fitness equipment by the athlete (eg, running a year) and through some parameters collected from

the user keys.

6. Labelling

The Remote MIFARE board has labeling showing FCC ID code, GDS SpA board code and Technogym SpA

codes.

Figure 3 Remote MIFARE board labelling

Using a permanently affixed label, the modular transmitter is labelled with its own FCC identification number,

and,

if the FCC identification number is not visible when the module is installed inside another device, then the

outside of the device into which the module is installed must also display a label referring to the enclosed

module.

This exterior label can use wording such as the following:

“Contains Transmitter Module FCC ID: XZRBRD01794 or contains FCC ID: XZRBRD01794”.

Any similar wording that expresses the same meaning may be used.