User's Manual

This document and information herein is the property of Global Display Solutions and all unauthorised use and
reproduction is prohibited. Copyright © 2012 by Global Display Solutions, Italy. All rights reserved. Confidential,
Unpublished Property of GDS.
MAN10455_00 4 of 5
2. Safety Instructions
The Remote MIFARE board is a Mifare reader module of the Technogym Devices Technogym Device
(Equipment Cardio, Trainer point or Class Reader).
Read the Safety Instruction carefully and keep it for use later.
Beware of all warning and instruction signs marked on the Remote MIFARE board.
Ensure that the ambient temperature around the module is between +5°C and +50 °C (with relative humidity
between 5% and 85%).
3. Mechanical dimensions
The electronic board has all components on one side only and the connectors must be of type SMT.
The Remote MIFARE board shows the following mechanical dimensions:
Figure 1 Remote MIFARE board mechanical dimensions
4. Connections
The Remone Mifare board has the main connector (Picoblade Molex SMT - 53398-087) with reference J9.
Pin
Function
Description
1
+3.3Vdc
Power Supply
2
UART_TX
Serial Data Out
3
UART_RX
Serial Data In
4
NC
RTS out
5
NC
CTS in
6
NC
Relè out
7
NC
NC
8
GND
Ground
Antenna
20mm x
16mm