User's Manual

1-866-AMPLICOM (267-5426)
31
Listen to messages or memos using the handset
1. Open the answering machine menu by pressing .
2. When Ans Machine is displayed, press
.
3. Scroll using
or to display either Play New Msgs or Play All Msgs,
then press
.
 1SFTT
to return to standby.
Memory full
When the memory is full, the answering machine announces that fact,
automatically stops taking more messages, and switches to Answer Only
mode. Some existing messages or memos must be deleted before any new
messages can be recorded.
Access the answering machine from a remote location
Messages on the answering machine can be listened to from other phones,
including mobile phones.
A PIN (Personal Identication Number) code is required to access the answering
machine. The default code is 000. Change the PIN code to keep messages
secure.
ANSWERING MACHINE
Service Center
32
Change PIN
1. Press and hold (located underneath the base) for two seconds. The
current 3 digit PIN will be announced and the rst new digit requested. Enter
a digit between 0 and 9.
2. Select the new rst digit using
or , the digits will also be shown on the
base message counter. Press
to conrm.
3. Repeat the above procedure for the 2nd and 3rd new digits.
 "GUFSUIFSEEJHJUIBTCFFODPOåSNFEUIFOFX1*/XJMMCFBOOPVODFE
Press at any time to exit the Change PIN code mode and return to stand-
by. The PIN code will remain unchanged.
Call in to check messages
1. Dial the system’s phone number from a remote phone and wait until the
answering machine picks up the call.
2. Press
twice, then enter the 3 digit PIN after the voice prompt.
3. Refer to the next section, “Manage messages from another phone” for
additional instructions.
ANSWERING MACHINE