User's Manual

1-866-AMPLICOM (267-5426)

MENU OPTIONS

Change a pro le’s handset Volume, Boost, or Equalizer

1. Open the menu by pressing , then scroll using or until you

highlight Pro le and press

2. Scroll using

or until Pro le 1 or 2 is highlighted, press .

3. Scroll using

or until the desired setting is highlighted, press .

4. The current setting will be displayed.

5. Change the appropriate setting using

or and press .

Note: Press

to exit the menu and return the handset to standby.

Choosing which pro le to use

Note: Handset must be used to choose a pro le for a call – a pro le cannot be

chosen using handsfree.

1. Before answering an incoming call, press

or .

2. The display will con rm your choice.

3. Before making a call, press and hold

to select a pro le.

Note: Once a pro le has been selected to use when making a call, the phone

will return to the default settings after 30 seconds.

Service Center

Changing Menu Settings

Handset ringer melody — There are ten ringer melodies.

Handset ringer volume — There are  ve volume levels plus Off.

Tone (“Equalizer”) setting — There are  ve tone settings.

Note: To adjust tone while making a call, press the button to

access the equalizer setting, press the

button to adjust the

setting. Press the volume switch on the side of the phone to exit this mode.

Remember boost — When this feature is set to On and the key on

the top left side of the handset is selected, the handset will remember and use

the last boost setting for each call.

Switch keypad beep on or off — Turns on or off the keypad beep.

Change contrast — There are  ve screen contrast levels.

Switch “auto talk” on or off — The phone will automatically answer

a call when the handset is removed from its base when Auto Talk is ON. This is

the default setting. If Auto talk is OFF, press the

button to answer any calls.

Change backlight timer — Choose between 10, 20, 30 or 40 seconds

until the backlight timer switches off.

MENU OPTIONS