User's Manual

1-866-AMPLICOM (267-5426)
29
ADDING A HANDSET
3. Scroll using or until Copy is highlighted and press .
4. Scroll using
or
until the handset (e.g. 2, 3 or 4) to copy the pro le to
is highlighted, and press
.
5. On the copy-to handset, press
to con rm or to cancel.
Setting or Changing system PIN code
1. Open the menu by pressing , then scroll using or until Base
settings is highlighted and press
.
2. Scroll using
or until System PIN is highlighted and press .
3. Enter the old PIN code (default PIN is 0000) and press
.
4. The phone will prompt for a new 4 digit PIN code (entered twice), press
.
Important: Do not change or reset the PIN code unless instructed by customer
service.
Service Center
30
Use on a private branch exchange
If the phone is on an exchange (e.g. dial 9 to get an outside line), calls can
be transfered or called back by using the R button. Check with the system
administrator for system set-up and instructions. Private exchanges are
normally used in a business-setting.
To set the recall time
1. Open the menu by pressing , then scroll using or until Base
settings is highlighted and press
.
2. Scroll using
or until Recall is highlighted and press .
3. The current recall timing setting (e.g. Short) will be displayed.
4. Choose the desired recall timing setting (Short or Long) using
or
and press .
Insert a dialing pause
Insert a pause before the dial tone if the system requires an outside line which
takes awhile to connect.
To insert a dialling pause, enter the number to reach the outside line and then
press
for two seconds. A P on the display will show dialing pause is active.
Note: A dialing pause can be used with a phone number in the phone book.
USE ON A PRIVATE BRANCH EXCHANGE