User's Manual

1-866-AMPLICOM (267-5426)

ADDING A HANDSET

Note: If no one picks up the call being transferred, re-answer the call at the

current phone by pressing

Make an internal call

If two or more handsets are registered to the base internal calls between

handsets can be made. Each handset will have been allocated a handset

number when registered, e.g. HS1, HS2 etc. These calls are free of charge.

1. Press and hold

. The display will show Handset? Enter the internal call

number of the handset desired.

2. To accept the call on the receiving handset, press

3. End the call by pressing

Make a conference call

1. During an external call, press and hold until a short beep is heard, then

enter the internal call number of the handset to transfer to.

2. To accept the call on the receiving handset, press

3. Once the call has been received on the other handset , activate the conference call

by pressing and releasing the

button.

4. Place the external call on hold by pressing

(if necessary).

5. The conference call will end when

is pressed.

Service Center

Copy phone book entries to another registered handset

Note: Phone books can only be copied to another handset if that handset is

registered on the same phone system.

• A single entry (Copy entry)

• Entries not already on the handset being copying to (Copy append)

• All entries (Copy all)

Important: when “copy all” is selected, all existing entries on the handset being

copied to will be deleted. To prevent this from happening use “Copy append.”

1. Open the phone book by pressing .

2. Scroll using

or to  nd the entry or entries to copy and press .

3. Scroll

to either Copy entry, Copy append, or Copy all and press

4. Scroll

to highlight the handset number to copy to and press

5. Pick up the handset where copying entries to and press

Copy a pro le

1. Open the menu by pressing , then scroll using or until Pro le is

highlighted and press

2. Scroll using

or until Pro le 1 or 2 is highlighted and press .

ADDING A HANDSET