User's Manual

1-866-AMPLICOM (267-5426)

ADDING A HANDSET

Adding a Handset

Note: The following features are only available to if an additional handset(s)

has been registered to the current phone system.

Only register a handset if it has become de-registered from the base or if it was

purchased separately.

Important: make sure any handset is fully charged before registering.

At the handset:

1. Press and hold

for approx 10 seconds until the display shows Press and

hold Page key.

At the base:

2. Press and hold

for at least 10 seconds until the display shows Register.

De-register a handset

De-register a handset if too many are currently registered on the phone system,

or if the handset develops a fault and needs to be replaced.

Service Center

To De-register a handset

1. Open the menu by pressing , then scroll using

until Handset is

highlighted and press

2. Scroll using

or until Registration is highlighted and press

Then scroll

to highlight De-register and press

3. Enter the PIN code (default PIN 0000) and press

4. Enter the handset’s internal number (e.g. 1) and press

to con rm.

Change handset name

1. Open the menu by pressing , then scroll using or until Handset

is highlighted and press

2. Scroll using

or until Handset name is highlighted and press .

3. Delete the current name by pressing

4. Enter a new name (up to 12 letters) and press

Transfer an external call internally

1. During an external call, press and hold

until a short beep is heard, then

enter the internal call number of the handset to transfer the call to.

2. To accept the call on the receiving handset, press

ADDING A HANDSET