User's Manual

Service Center

Important: It is necessary to register the wrist shaker if it has become

de-registered from the telephone or if a new wrist shaker needs to be

registered.

At the wrist shaker:

1. Turn on the wrist shaker by pressing and holding

for about ve seconds.

2. After the wrist shaker is On, press and hold

again for about 12 seconds,

until the registration light ashes green. The wrist shaker will be in

registration for about 1 minute.

At the corded phone base:

3. Press and hold

PAGE

for at least 10 seconds, until Register

is displayed (for about 10 seconds).

Note: To located the registration key

PAGE

, see the At a Glance section for the

corded phone base at the beginning of this guide.

4. The registration light unit glows a steady green when the wrist shaker is

registered (i.e. it isn’t ashing).

Note: The registration light will ash green and red if the wrist shaker

either isn’t registered or is out of range.

WRIST SHAKER