User's Manual

Service Center
36
Use on a Private Branch Exchange
If the phone is on an exchange (e.g. dial 9 to get an outside line), calls can be
transfered or called back by using the
FLASH
button. Check with the system
administrator for system set-up and instructions. Private exchanges are
normally used in a business-setting.
Set the recall time using the corded phone
1. Open your menu by pressing
MENU
, then scroll using
REDIAL/P
or
CID/FLASH
to
highlight Settings and press
MENU
.
2. Scroll using
REDIAL/P
or
CID/FLASH
to highlight Recall and press
MENU
.
3. The current recall timing setting (e.g. Short) will be displayed.
4. Choose the desired recall time setting (Short or Long) using
REDIAL/P
or
CID/FLASH
and press
MENU
.
Set the recall time using the cordless handset
1. Open the menu by pressing A or
MENU
, then scroll using
REDIAL
or
FLASH
until Base
settings is highlighted and press B or OK.
2. Scroll using
REDIAL
or
FLASH
until Recall is highlighted and press B or OK.
3. The current recall timing setting (e.g. Short) will be displayed.
USE ON A PRIVATE BRANCH EXCHANGEUSE ON A PRIVATE BRANCH EXCHANGE