User Guide

Each iTach has an internal IR learner.
To use it, download the iLearn appli-
cation from our downloads page and go
through the tutorial located at
www.globalcache.com/docs.
Once connected to your learner, sim-
ply point your remote at the small hole
located to the right of the power con-
nector, and input any button you want
captured by iLearn.
Troubleshooting. iTach congura-
tion can be reset to factory defaults by
inserting a large metal paper clip into
the small opening located to the right
of the power connector. Only insert the
paper clip approximately 1/8” (3mm)
in. e LEDs on the front of the iTach
will rapidly blink in unison, indicating
a reset. Use a light touch when resetting
your iTach, as force may damage your
iTach hardware irreparably.
Global Caché, Inc.
160 East California Street
PO Box 1659
Jacksonville, Oregon 97530
Phone [phone] - Fax [phone]
www.globalcache.com - [e-mail]
Copyright ©2016 Global Caché, Inc. All rights reserved.
PN: 120209-02 ver.6 Information subject to change without notice.