User's Manual

INSTALLATIONS
J2: Digital I/O Connector (4 in, 4 out)
This 10-pin digital I/O connector supports TTL levels and is used to
control external devices requiring ON/OFF circuitry.
Signal Name Pin # Pin # Signal Name
Ground 1 2 +5V
Out3 3 4 Out1
Out2 5 6 Out0
IN3 7 8 IN1
IN2 9 10 IN0
J4: External Audio Connector for 7.1 channel
Signal Name Pin # Pin # Signal Name
SIDESURR_L 1 2 SIDESURR_R
SIDESURR
Detect
3 4 Ground
SURR_Out_L 5 6 SURR_Out_R
SURR_Out Detect 7 8 Ground
Center_Out 9 10 LFE_Out
Center/ LFE Detect 11 12 Ground
JP4: For LPC I/F Adaptor Card
ID394 with Fintek F81216, 2 or 4 Serial Ports
ID395 Winbond WPCT200 x1 for TPM1.2
J5: Power LED
The power LED indicates the status of the main power switch.
Pin # Signal Name
1 Power LED
2 No connect
3 Ground
18 2807700 User’s Manual