User's Manual

3301630 User’s Manual Hardware Setup

SATA &IDE Setup

2.6 <Enhanced IDE Interface>

The board has one UltraDMA33 IDE interface to support up to 2 ATAPI devices, and one

CompactFlash Type II socket on the solder side, with jumper JCFSEL for IDE

master/slave mode selection.

Jumper: JCFSEL

Type: onboard 3-pin header

JCFSEL Mode

1-2 Master

2-3 Slave

Default setting

2.7 <Serial ATA Interface>

Based on Intel ICH6-M, the board provides two Serial ATA interfaces with up to 150MB/s

of transfer rate.

SATA1

SATA2

1 3

JCFSEL