User Manual

OPERATION METHODS
Cooling mode
When the unit is turned on it will default to cool mode or press Mode button to choose cool mode,
the Cool mode indicator will flash.
·Press UP or DOWN button to set room temperature between 60 to 86 F.
·Press FAN SPEED button (or High/Low button) to select high, low fan speed.
Fan mode
·Press Fan button to choose Fan mode, the Fan mode indicator will flash.
·Select the fan speed by press SPEED button or press High / Low button directly.
·The temperature will remain the same.
Dehumidification mode
·Press
·Under the dehumidification mode, the fan speed is low speed and can not be adjusted.
·Temperature can not be set.
·If the room temperature is ≥17℃(62℉),the compressor will run . When the room temperature
is ≤15℃(59℉),the compressor will stop; When the room temperature rise back to 17℃(62℉),
the compressor will restart.
Mode button to choose dehumidification mode, the indicator will flash.
Sleep mode （Optional Function）
Press this button to activate or cancel sleep function in cooling mode
The
Under the sleep mode, the fan speed is low speed and can not be adjusted.If press the speed
button,the display shows ‘SL’.
unit will run at the low fan speed as default with lower noise. The setting temperature will
increase 1 degree per 2 hours running time, and it will not change after increasing 2 degrees
Timer mode
.When the appliance is switch off, press Timer button to set timer-on.
·Press Up or Down button to adjust time from 0 to 24 hours. The Timer on indicator will flash.
When the appliance is running,
press Timer button to set timer-off.
Press Up or Down button to adjust time from 0 to 24 hours. The Time off indicator
will flash.
9