YPL3-10C-1 Portable Air Conditioner User Manual Thank you for selecting this super quality air conditioner. Please be sure to read this manual carefully before using it.
CONTENT SAFETY…........................................................................................................... 3,4 INSTALLATION…............................................................................................. 4,5 PART NAME….................................................................................................... 5,6 CONTROL PANEL.................................................................................. ... ......7 REMOTE CONTROL...................... ...... .......
SAFETY PLEASE READ ALL THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS APPLIANCE. Only use this appliance for domestic purposes and in the way indicated in these instructions. Never use for any other purposes. Do not use the appliance outside and always place it in a dry environment. From time to time, check the cord. Never use the cord, the plug or the appliance when they show any sign of damage. The cord length of this product has been selected to reduce the possibility of being injured.
Do not plug in the appliance with an AC adaptor. Plug into the wall socket before switching on the appliance then press on the ON/OFF button. THE MANUFACTURER WILL NOT ASSUME ANY RESPONSIBILITY IN CASE OF NON ADHERENCE TO THESE INSTRUCTIONS. KEEP THIS USER MANUAL CAREFULLY. INSTALLATION Selection of installation location Keep the unit on a flat surface and dry place. Leave at least 20 inch space all around the unit.
Incorrect mounting Preventing any bends of the exhaust pipe is very important. Incorrect mounting can prevent the machine from working correctly. Take care to prevent any sharp bows or bends of the exhaust pipe. The exhaust air must flow freely。 WARNING The length of the exhaust pipe is specially designed according to the specification of this product. Do not replace or extend it with your own private hose as this could cause mal-function. BE CAREFUL: Maximum length of the exhaust pipe is 59 inch.
9. Handle 10 Back 10. Exhaust air outlet vent 11 11. Power cord 12. Big filter 12 13. Small filter 14. Draining hole 13 14 Check all the accessories included in the package and please refer to the installation instructions for their usage.
CONTROL PANEL 1. POWER button: press this button to turn on/off the unit. 2. MODE button: press this button to select Cooling, Automatic adjusting mode or Fan mode 3. SPEED button: press this button to select high, low fan speed 4. Timer: During Stand-by mode press this key to set automatic time on; During running mode press this key to set automatic time off. 5.
REMOTE CONTROL 1. Power 7 2. Celsius and Fahrenheit exchange button 3. Fan button 8 6 5 4. Cool Mode Button 5. Auto mode button 9 6. Down button 10 7. Up button 11 8. High fan speed button 12 4 3 2 1 9. Low fan speed button 10. Max cool button 11. Sleep Mode 12.
OPERATION METHODS Cooling mode When the unit is turned on it will default to cool mode or press Mode button to choose cool mode, the Cool mode indicator will flash. ·Press UP or DOWN button to set room temperature between 62.6 to 86 F. ·Press FAN SPEED button (or High/Low button) to select high, low fan speed. Fan mode ·Press Fan button to choose Fan mode, the Fan mode indicator will flash. ·Select the fan speed by press SPEED button or press High / Low button directly.
WATER DRAINAGE This product has a self-evaporative system. The condensing water will be recycled to cool the condenser. This can not only improve cooling efficiency, but also save energy for you. Air goes through the unit, some steam in the air will condensate, When it is over 80% with humidity,the rate of condensating surpasses its self-evaporative rate,some water remains. · If the inside water is full, the display panel will display “FL”, and the compressor will stop running.
Storage ·Please drain the water. ·Keep the unit running in Fan mode for two hours until the inside of the unit is dry. ·Turn off the unit and unplug it. ·Clean the air filter and after dry it thoroughly, reinstall it. ·Remove the exhaust pipes and keep them carefully. ·Wrap the unit with the plastic bag and keep it in a dry place. TROUBLE SHOOTING Before contacting professional service, check it first yourself referring to the followings: Problem Cause Solution The air conditioner does not function.
Shinco® SERVICE CENTER 1845 S.Vineyard Ave.Ste.4 Ontario.CA 91761 Tel:909-974-2859 Fax:909-974-2865 Hours:8:30AM-5:00PM PST TO OBTAIN WARRANTY SERVICE Contact Shinco Technical Suport Email:TechSupport@cchappliance.com Phone:800.838.3315 From 8:30AM to 5:00PM Monday through Friday Pacific Time. WARRANTY PERIOD: Labor: 1 Year from the Date of Purchase. Parts: 1 Year from the Date of Purchase. Compressor: 3 Years from the Date of Purchase.
