Use and Care Manual

Control Panel and Remote Controller

Cooling model

1. Power key

Press the key to turn ON/OFF the A/C.

2. Swing key

Press this key at any time after turning on the A/C to swing

the wind guide bar automatically.

3. Speed key

Press the key to choose high/ Mid /low gear wind speed.

4. Temperature/ time adjusting key

Press the key at cooling mode to increase/reduce the setting

temperature; press it at timing mode to adjust timing ON/OFF

time; press Up and Down keys simultaneously to switch

Fahrenheit and Centigrade degree temperature.

5. Mode key

Press the key to choose cooling, wind, dehumidification and

automatic (or heating for cooling/heating model) mode.

6. Timer key

Press the key at standby mode to set ON time.

Press this key at ON mode to set OFF time.

7. Temperature/ time display window

This window displays the adjusted temperature and

time.

8. Remote

controller receiving window

This window is used to receive signal of the remote

controller.

9. ℃

/℉ switching key

Press the key to switch ℃ and ℉.

Cooling mode