Installation Guide

SIDE-TO-SIDE:
Door is adjustable side to side by turning screw
A
clockwise or
counterclockwise.
UP-DOWN:
Loosen screw
B
on both top and bottom of hinge plate. Raise or
lower door to the desired position and re-tighten both screws.
IN-OUT:
Loosen screws
C
on both top and bottom hinges. Move the door in or
out to desired position and re-tighten.
HINGE ADJUSTMENT
SHELF ADJUSTMENT
For your convenience, adjustable shelves
have been pre-installed. In order to adjust
shelf location:
1.
Carefully slide the shelf out from shelf
clips.
See fig.1.
2.
Loosen each shelf clip screw (two for
each shelf) and slide to the desired location.
See fig 2.
3.
Carefully slide the shelf into the shelf clips
making
sure shelf is level and retighten
shelf clip screws.
Screw A
Screw C
Screw B
Screw B
shelf clip screw
tornillo de soporte de repisa
vis d’attache de tablette
fig. 2
fig. 1
5