Instructions / Assembly

Remote Control
NOTICE:
Control panel Power Switch must be ON to use remote control.
Aim the remote control at the remote receiver. Make sure you hear a beep each
time you press the button! If not, the fireplace will not respond to the signal.
Power ON/OFF
Heater setting
Flame Flame
Log Speaker
Timer
Top light
NOTICE:
Operation for all functions are same as the buttons on the fireplace.
The TIMER button on the remote control can’t press 10s into the log speaker,
also can’t press 10s into the TIMER,but you can press 10s on the fireplace
Timer button,then press TIMER on the remote to get the log speaker,also you
press the TIMER 10s on the fireplace,then press TIMER on the remote to
operate the TIMER from 1hr,2hrs...9hrs,off.