Instructions / Assembly

【
【
【
【Instruction
Instruction
Instruction
Instruction for
for
for
for Remote
Remote
Remote
Remote Controller
Controller
Controller
Controller and
and
and
and Switch
Switch
Switch
Switch Panel
Panel
Panel
Panel】
】
】
】
Control Panel / Remote Control Operation
(Control panel POWER switch must be ON to use remote control.)
POWER
Turns the appliance ON/OFF.
FLAME - Log
TIMER
TEMPERATURE
Controls Flame brightness.
5 Settings
: ( L1-L2-L3-L4-L5) Flame dims from L1 to L5.
F5 is the brightest setting.
Controls Log Flame change.
3 colors
: ( F1-F2-F3) Flame dims from F1 to F3.
.
Controls the Timer.
9 Settings:
(1h, 2h, 3h, 4h, 5h, 6h, 7h, 8h,9h) Press button
until reach desired setting.
FLAME
Display Value
Temperature
0 1 2 3 4 ... 12 13 14 15 N
17 18
19 20 21 ... 27 28 29 30
ON
62 64
66 68 69 ... 80 82 84 86
ON
° C
° F
HEATER
Controls the Heater.
Press button to initiate the heate
r.
(OFF) no heater or blower.
(LO), heater blows warm air (750W)
(HI), heater blows hot air (1500W)
NOTE
: Heater functions cycle from OFF-LO-HI
1. Press once: Touch panel indicator becomes active.
2. Press again until desired setting is reached. Digital display
shows setting circles as belo
w.
NOTE: Press the button for 10 seconds, the temperature
setting will switch from °C to °F. Same way from °F to °C.
The touch display panel is shown by LED's on the front bottom right of the appliance. The LED's will
appear on the bottom of the fireplace control panel.
WARNING : Do not move or remove the mesh trim panel, when the appliance is plugged in and
operating. This will cause the remote control and touch panel to no longer function.