Instructions / Assembly

Using the Philips Screw Driver"+"
Driver"+"
Driver"+"
Driver"+" to fix the six screws on the wall between two sides Figure (A)
(A)
(A)
(A).Make sure
ALWAYS
ALWAYS
ALWAYS
ALWAYS unplug
unplug
unplug
unplug this fireplace heater before
before
before
before assembly
assembly
assembly
assembly or cleaning,
cleaning,
cleaning,
cleaning, or
or
or
or before
before
before
before relocating.
relocating.
relocating.
relocating.
Failure to do so could result in electric
electric
electric
electric shock
shock
shock
shock, fire
fire
fire
fire, or p
ersonal
personal
personal
personal injury
injury
injury
injury.
Warning
Warning
Warning
Warning
Figure A
the front of the firebox is not lower than the surface of the wall.
Carefully set both hooks of the front glass panel onto the firebox.Note:make sure the glass fully attached to the
firebox so that the control panel can work properly.This will keep the decorative glass in place and enable the
control panel work well.
This carton includes GLASS!ALWAYS use extrme caution when handing glass.
Failure to do so could result in personal injury or property damage.
Warning
Warning
Warning
Warning
A
A
3 : 1
Figure B
Put the Fireplace box into the wall, there're two hanger brackets in both sides of the fireplacebox, using
6 pcs of ST4X
ST4X
ST4X
ST4X40 screws(each side with 3 screws) to lock the fireplace in the wooden wall.
The next step requires installation of a Glass panel!The manufacturer recommends that two adults install,
the glass panel.Always use extrme caution when handling glass.Failure to do so could result in
personal injury or property damage,please see the Figure (B).