Use and Care Manual

Control Panel
Located on the right and top side panel of the fireplace.
NOITCNUF EMAN NOTTUB
POWER
SWITCH
Turn on the main power supply. A long “beep” sound will be heard
when the switch is turned on On Position “I”.
Note: The remote control will lost the memory for function settings
when the switch is turned on Off Position “0”.
FLAME
The flame will be cycled F1 – F2 – F3 – F4 – F5-Flame Off.
F1 is the less flame,F5 is the biggest flame.
HEATER
The heater will be cycled Low – High – Heater Off. You will see the
screen light illuminates on right of the flame board.The indicator light
goes out within 5s.
Low: (LO)
High: (HI)
Note:
1. Fireplace can be used without heater.
2. Whether the heating is working depends on whether the settled
temperature by thermostat is higher than the environment
temperature.
3. The Fan works anterior to the heater about 10s, and turns off later
than the heater about 10s.
Log Speaker
The log speaker can make the real log burning effect.
Press first time to turn on the log speaker,
Press second time to turn off the log speaker.
TOP LIGHT
There are three colors for option.
Press the first time for orange color,
Press the second time for the blue color,
Press the third time for the purple color.
TIMER
This fireplace is equipped with a timer ranging from 1hr to 9hrs(1H,2H
...9H,Off shown on the LCD display),touch the button once for every
1hr increase.