Instructions / Assembly

ManualsBrandsGlitzhome ManualsGarden Center8.75 in. H Black Metal Cutout Leaf Solar Powered Outdoor Hanging Lantern with LED Light (Set of 2)

ASSEMBLY INSTRUCTION

Get social with us and discover more about our products, tips and exclusive discounts!

Carefully unpack and identify each component before begining assembly. Before you

begin, please refer to part list to make sure that you have all parts. Please take care when

assembling the unit and always place the parts on a clean, soft surface. If you require

assistance with assembly or parts, please call 888-357-7263.







Summary of content (6 pages)

PAGE 1
ASSEMBLY INSTRUCTION Carefully unpack and identify each component before begining assembly. Before you begin, please refer to part list to make sure that you have all parts. Please take care when assembling the unit and always place the parts on a clean, soft surface. If you require assistance with assembly or parts, please call 888-357-7263.
PAGE 2
HOW THE SOLAR LIGHT WORKS During the day, the solar panel converts solar power into energy and stores it in the rechargeable battery. At night, the light turns on automatically and using the energy stored. The duration of the illumination will depend on your geographical location, weather conditions and seasonal light availability. CHOOSE AN IDEAL LOCATION Choose an outdoor location where the solar panel can receive at least 8 hours of full and direct sunlight each day.
PAGE 3
OFF ON 1. Make sure the power switch is at the "ON" position. 2. Check the battery and make sure the battery contacts the terminals securely. 3. Make sure the solar light is located in a sunny location and the solar panel can receive direct sunlight. PRECAUTIONS 1. Please note the solar light is designed to work when the environment gets dark. If there are strong light sources nearby, the solar light may illuminate dimly or not light up at all. 2.
PAGE 4
REPLACE BATTERIES 1pc 1.2V AA 600MAH Ni-MH rechargeable battery included, same equivalent type as recommended must be used. Step1: Unscrew the battery compartment cover by using a Phillips head screwdriver (not included).The battery compartment is located underneath the solar panel. Step2: Remove the exhausted battery and install 1pc new AA rechargeable battery according to the +/- polarity. Open the compartment carefully and ensure that welding wires inside the battery terminals are not damaged.
PAGE 5
ASSEMBLY (A) QTY: 1 (B) QTY: 1 SAVE THESE INSTRUCTIONS - THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR POWER UNITS.
PAGE 6