Instructions / Assembly

REPL ACE BAT TERI ES

WARNING

1pc 1.2V AA 600MAH Ni-MH rechargeable battery included,

same equivalent type as recommended must be used.

Step1: Unscrew the battery compartment cover by using a Phillips

head screwdriver (not included).The battery compartment

is located underneath the solar panel.

Step2: Remove the exhausted battery and install 1pc new AA

rechargeable battery according to the +/- polarity. Open

the compartment carefully and ensure that welding wires

inside the battery terminals are not damaged.

Step3: Replace battery compartment cover, screw it back into

position and make sure is properly sealed.

1. Keep batteries away from children. This product is not a toy.

2. Ensure battery contacts are clean and free of debris.

3. Install batteries according to correct polarity (+/-).

4. Remove batteries when consumed or when product is not in

use for an extended period of time.

5. Contains Ni-MH battery. Batteries must be recycled or disposed

of properly, in accordance with all state and local regulations.

DO NOT crush, puncture, or incinerate.

Assembly Instruction