Instructions / Assembly

ASSEMBLY INSTRUCTION
Glitzhome, LLC
1
PRECAUTIONS:
1. Please note the solar light is designed to work when the environment gets dark. If there are strong light sources nearby,
the solar light may illuminate dimly or not light up at all.
2. Although the battery has been charged by the manufacturer, the electric charge may have dropped by the time consumer
receives the product. Please let the solar light charge for a full day for the maximum performance.
3. Surface of the solar panel must be kept clean. Dusty surface will reduce charging efficiency.
REPLACE BATTERIES:
If the solar light stops working after it has been used for a long time, the battery may need to be replaced. You may open
the battery cover and replace it with a new rechargeable battery. 1pc 1.2V AAA 600MAH, Ni-MH rechargeable battery
(included), same equivalent type as recommended must be used.
Step1: Unscrew the battery compartment cover by using a Phillips head screwdriver (not included). The battery compartment
is located underneath the solar panel.
Step2: Remove the exhausted battery and install 1pc new AAA rechargeable battery according to the +/- polarity.
Open the compartment carefully and ensure that welding wires inside the battery terminals are not damaged.
Step3: Replace battery compartment cover, screw it back into position and make sure is properly sealed.
1. CHOKING HAZARD – small parts. Keep batteries away from children. This product is not a toy.
2. Ensure battery contacts are clean and free of debris.
3. Install batteries according to correct polarity (+/-).
4. Remove batteries when consumed or when product is not in use for an extended period of time.
5. Contains Ni-MH battery. Batteries must be recycled or disposed of properly, in accordance with all state and local
regulations. DO NOT crush, puncture, or incinerate.
WARNING