Instructions / Assembly

User Instruction
14
STEP 4
Attach the steel base to the
bottom part of the Table Top (B)
by using 4pcs M6X35mm Bolts
(J), 4pcs M6 Flat Washer (L)
and 4pcs M6 Spring Washer
(M).
STEP 5
Insert the Door (H) to Right
Front Panel (F) and attach Door
Knob (R) to the door by using
M4X25mm screw (S) and M4
Flat Washer(T).
STEP 6
Place propane gas tank (not
included) into the Metal Stand
(I). Make sure the gas tank sits
on the metal stand completely.
Turn the preassembled wing
screw on the outer part of metal
stand clockwise to secure the
propane gas tank tightly.
STEP 7
Remove the rubber cap on the
electronic ignitor by unscrewing
and slide Battery (P) (not
included) into the battery slot.
Make sure the positive side of
the battery faces outwards.
Screw the electronic ignitor cap
over the battery tightly.