Instructions / Assembly

User Instruction
5
The installation must conform with local codes or, in the absence of all applicable local
codes, including, without limitation, with the National Fuel Gas Code, ANSI Z223.1/NFP A
54; International Fuel Gas Code; Natural Gas and Propane Installation Code, CSA
B149.1; or Propane Storage and Handling Code, B149.2, as applicable.
The appliance and its appliance main gas valve must be disconnected from the gas
supply piping system during any pressure testing of that system at test pressures in
excess of 1/2 psi (3.5kPa).
The appliance must be isolated from the gas supply piping system by closing its
equipment shutoff valve during any pressure testing of the gas supply system at test
pressure equal to or less than 1/2 psi (3.5kPa).
The appliance area must be kept clear and free from combustible materials, gasoline and
other flammable vapors and liquids.
Do not use this appliance if any part has been damaged or under water. Immediately call
a qualified service technician to inspect the appliance and to replace any part of the
control system and any gas control which has been damaged or under water.
IMPORTANT SAFETY INFORMATION
DANGER
Failure to comply with the precautions and instructions provided
with this fire pit can result in death, serious bodily injury and
property loss or damage from hazards of fire, explosion, burn,
asphyxiation, and/or carbon monoxide poisoning. Only persons
who can understand and follow the instructions should use or
service this fire pit.
WARNING
Do not sit or stand on appliance even when not in use and do not
touch appliance while in use or for at least 45 minutes after use as
the appliance is very hot during use and can cause serious burns.
WARNING
The appliance will remain hot for up to 45 minutes after use. Do not
touch or move appliance for at least 45 minutes after it has been
completely shut off.