Instructions / Assembly

User Instruction
13
BATTERIES
Make sure the control knob is in the “OFF” position.
Unscrew the push button cap on the ignition
module located on the control panel to access the
battery compartment. The ignition module requires
one AAA size battery. Battery is not included.
NATURAL GAS CONVERSION
WARNING
Prior to turning gas on and attempting to light the appliance,
make sure the appliance is outside, in a well ventilated area
and free of any debris and is not in contact with or near any
people, animals, materials or structures. Failure to adhere to
the above instruction may result in property damage, serious
bodily injury or death.
To Light
1. Read instructions before lighting.
2. Control knob must be in the “OFF” position.
3. Connect propane cylinder (See Manual), open cylinder valve.
4. Push and turn control knob counter clockwise to “LOW”.
5. Press the igniter button repeatedly to light burner.
6. Release control knob after 15 seconds for the first time using.
7. If ignition does not occur in 15 seconds, push and turn burner control knob to “OFF”,
wait 5 minutes, fan with newspaper or magazine, and repeat lighting procedure.
8. If igniter does not light burner, use a long match or long butane lighter.
9. After burner ignites, adjust flame to desired flame with the control knob.
To Extinguish
1. Turn and push the control knob clockwise to the OFF position.
2. Close cylinder valve, disconnect propane cylinder.
LIGHTING INSTRUCTIONS