Instructions / Assembly
User Instruction
10
STEP 1
Connect the Front Right Post
(D), Side (G), Back Post (C),
Side (G) with 6 pieces ¼ in x
20mm Bolts (S), 6 Spring
Washers (Q) and 6 Flat Washers
(P) as shown on the right.
STEP 2
Secure the Side (G), Back Post
(C), Ignition Side (F), Front Left
Side (E) with 6 pieces ¼ in x
20mm Bolts (S), 6 Spring
Washers (Q) and 6 Flat Washers
(P).
STEP 3
Secure the Cylinder Holder (I)
and Front Left Post (E), Front
Right Post (D), Back Post (C)
with 4 pieces ¼ in x 20 mm
Bolts (S), 4 Spring Washers (Q)
and 4 Flat Washers (P) just as
right shown.
Secure the side (G), back post (C), ignion side (F), front le side (E) with 6 pieces
mm bolts (S),
6 spring washers (Q) and 6 flat wahsers (P).
ASSEMBLY INSTRUCTIONS
* Please keep this owner's manual for future reference.
* Please unpack and identify all parts using the parts list provided.
* Note: DO NOT tighten any bolts until all bolts have been started.