Instructions / Assembly

Assembly Instruction

CAST ALUMINIUM PATIO

DINING SWIVEL CHAIR

Elm Plus, LLC

PAGE 1
Elm Plus, LLC Assembly Instruction CAST ALUMINIUM PATIO DINING SWIVEL CHAIR
PAGE 2
PRE-ASSEMBLY PREPARATION WARNING! DO NOT LET CHILDREN PLAY IN OR AROUND THE UNIT DUE TO THE POSSIBLE RISK OF FINGER ENTRAPMENT • Please read through this instruction before beginning assembly. • Two adults assembly is recommended. • Clear out the space for assembly and lay out all parts base on Parts List, extra room will allow you to easily determine if all the pieces are present. • Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware.
PAGE 3
Step 1 First, Slide Connecter (B) into Base (C). Second, Place Seat (A) onto Connecter (B) by using 4 Bolts (D), 4 Spring Washers (E), 4 Flat Washers (F) and 4 Nuts (G) (see Figure 1). Finally, Tighten all Bolts (D) with Wrench (I) . Cover all Nuts and Bolt heads with Nut Caps (H). H D A F B H F E G H Figure 1 C Step 2 Caution: This chair can only be used on a flat, level surface.