Use and Care Manual
STEP 2
NO. DESCRIPTION SKETCH QTY
3PCS
1PCALLEN WRENCH3
8 ALLEN BOLT M6*12mm
REQUIRED HARDWARE IN THIS STEP
Slide the end of right upper frame (A) into the end of left upper frame (C) so the holes align. Secure the frame
together with allen bolt (8) using allen wrench (3). Leave the bolt out of the top hole on the outside.
Use only 1 bolt
8
8
REQUIRED HARDWARE IN THIS STEP
NO. DESCRIPTION SKETCH QTY
8PCS1 ALLEN BOLT M6*10mm
1PCALLEN WRENCH3
STEP 1
Attachright upper frame (A) on right bottom frame (B) with Allen bolts (1) and Allen wrench (3).
Repeat this action for left upper Repeat this action for left upper (D).
1
A
B
The 4 holes must be on
the same side and align
C
D
A
B